Copper Alloy
Copper Alloy CuNi30Mn1Fe (C71500)
Copper Alloy CuNi30Mn1Fe (C71500) is a copper alloy.
PropertiesAbout these values
- Typical room-temperature values for the default supply condition.
- Bars show where CuNi30Mn1Fe (C71500) sits against the other copper alloy grades in the catalog (shaded band = 10th–90th percentile, tick = median).
- Confirm against the certified mill / resin datasheet before design release.
About these values
- Typical room-temperature values for the default supply condition.
- Bars show where CuNi30Mn1Fe (C71500) sits against the other copper alloy grades in the catalog (shaded band = 10th–90th percentile, tick = median).
- Confirm against the certified mill / resin datasheet before design release.
Datasheet
Values are nominal handbook figures for design screening. Certified mill or lot data ships with every FabDigit order on request.
Against other copper alloy grades
Strength versus weight in the copper alloy family
Yield strength against density for every copper alloy grade FabDigit runs. CuNi30Mn1Fe (C71500) is highlighted; hover a dot for its name, or open the interactive family chart.
Surface finishes for CuNi30Mn1Fe (C71500)
Coatings and treatments compatible with copper alloy on the processes CuNi30Mn1Fe (C71500) runs on. Pick them in the quote configurator or call them out on the drawing.
Plating
- Copper Plating
- Electroless Nickel (EN)
- Gold Plating
- Silver Plating
Equivalent designations
Standards and trade names that resolve to Copper Alloy CuNi30Mn1Fe (C71500) in FabDigit's catalog. Equivalence is nominal — check the exact specification when certification matters.
- UNS
- C71500
- EN / DIN / Werkstoff-Nr.
- CuNi30Mn1Fe
- GB (China)
- BFe30-1-1
- Also called
- 白铜
Property data is compiled from published supplier and standards handbooks and normalised for comparison; hardness values on non-Brinell scales are converted approximately for charting only. Manufacturability limits are FabDigit quote-engine defaults and may be relaxed by engineering review. Nothing on this page is a certification — request mill certs, CoC or material test reports with your order.