Titanium

Titanium ASTM B817 Type II

Titanium ASTM B817 Type II is a titanium.

Quote a part in ASTM B817 Type II Compare with…All titanium grades

Properties

Datasheet

Values are nominal handbook figures for design screening. Certified mill or lot data ships with every FabDigit order on request.

Against other titanium grades

Yield strength—

275 MPa40 ksifamily median 620 MPa90 ksi1,067 MPa155 ksi

Tensile strength—

345 MPa50 ksifamily median 740 MPa107 ksi1,171 MPa170 ksi

Density—

4.44 g/cm³0.16 lb/in³family median 4.51 g/cm³0.163 lb/in³4.73 g/cm³0.171 lb/in³

Hardness (HB equiv.)—

170 HBfamily median 279 HB366 HB

Max service temp—

315 °C599 °Ffamily median 388 °C730 °F425 °C797 °F

Electrical conductivity—

0.95 % IACSfamily median 1 % IACS4.1 % IACS

Machinability—

40 / 100family median 40 / 10040 / 100

Relative cost—

83family median 9090

Strength versus weight in the titanium family

Yield strength against density for every titanium grade FabDigit runs. ASTM B817 Type II is highlighted; hover a dot for its name, or open the interactive family chart.

Surface finishes for ASTM B817 Type II

Coatings and treatments compatible with titanium on the processes ASTM B817 Type II runs on. Pick them in the quote configurator or call them out on the drawing.

Thermal Spray

Plasma Spray

Equivalent designations

Standards and trade names that resolve to Titanium ASTM B817 Type II in FabDigit's catalog. Equivalence is nominal — check the exact specification when certification matters.

UNS: R56400
ASTM: B817 Type II
Also called: Ti-6Al-4V P/MTi-6Al-4V粉末冶金件II型钛合金粉末冶金结构件粉末冶金钛合金B817-IIR56400钛合金

Property data is compiled from published supplier and standards handbooks and normalised for comparison; hardness values on non-Brinell scales are converted approximately for charting only. Manufacturability limits are FabDigit quote-engine defaults and may be relaxed by engineering review. Nothing on this page is a certification — request mill certs, CoC or material test reports with your order.